Assembly

STEP 2A
Place a sticky feet on each corner at the bottom of the base. Snap the posts into the base.

STEP 2B
Hook the U-Wire through the last chain link, and then push the wire through the top of the base. Flip the base over and press the wire ends down in opposite directions. Using the cord, tie a knot onto the jump ring.

STEP 2C
Insert 5 medium acrylic rods through one basket side. Gently flip the basket side over onto your surface.

STEP 2D
Insert your pennies.Fit the other basket side through the rods and secure each rod end with an o-ring. Take time to center your counterweight basket.

STEP 2E
Insert a medium rod through one basket side and immediately meet it with 2 o-rings. Hold the arm in between the basket sides, push the rod through the second arm hole and immediately meet it with 2 o-rings. Push the rod through the other basket side and secure the end with 1 o-ring. Take time to center as pictured.

STEP 2F
Similar to the previous steps -- Insert the large rod through one post and immediately meet it with 2 o-rings. Hold the arm in between the posts, push the rod through the third arm hole and immediately meet it with 2 o-rings. Push the rod through the other post and secure the end with 1 o-ring. Take time to center as pictured.